The design of the CBS-Contained Blast System offers the maximum in efficiency and dependability. Vacuum blasting was introduced into the market not to replace open abrasive blasting, but to be utilized in situations where containment is critical. The CBS was engineered to be the most productive vacuum blast recovery unit to date. It is extremely low maintenance and highly versatile.

Our CBS units are efficient in coatings removal and will leave the surface to any desired specification, whether it be a brush-off blast or white metal finish. The CBS can be adapted to almost any existing blasting equipment on the market. If the situation calls for power tool cleaning, our CBS can easily be adapted for handling up to eight vacuum shrouded tools.

FEATURES AND BENEFITS:

STEEL WORKHEAD
•All steel body for maximum durability
•360° swivelling nozzle allows the workhead to rotate around the nozzle, offering greater mobility and less fatigue to the operator
•Replaceable steel wear sleeves allow the use of virtually any blast nozzle
•Multiple brushes available for coatings removal on flat, inside corner and outside edge surfaces
•3" blast pattern
•Can be fitted to all existing Blasting Equipment

PORTABLE VACUUM RECOVERY
•Wide range of system options allows you to customize a unit to meet your needs
•Available with or without H.E.P.A. filters
•Dual vacuum pumps available for maximum vacuum flow
•Optional 4 or 8 port vacuum manifolds can be used to run vacuum shrouded power tools

BENEFITS OF VACUUM BLASTING
•Same results as open blasting without the mess
•Healthy, safe, dust-free environment
•Contains hazardous & non-hazardous materials without the need for an elaborate containment system
•Allows other work to be done in the same area while blasting in performed

CBS Workhead 314.0015	CBS Workhead Kit 314.0020	CBS System 8 Port Multi Tool Vacuum

Model	Part No.	Weight
CBS Workhead	314.0015	6lbs
CBS Workhead Kit	314.0020	10lbs

The design of the CBS-Contained Blast System offers the maximum in efficiency and dependability. Vacuum blasting was introduced into the market not to replace open abrasive blasting, but to be utilized in situations where containment is critical. The CBS was engineered to be the most productive vacuum blast recovery unit to date. It is extremely low maintenance and highly versatile.

Our CBS units are efficient in coatings removal and will leave the surface to any desired specification, whether it be a brush-off blast or white metal finish. The CBS can be adapted to almost any existing blasting equipment on the market. If the situation calls for power tool cleaning, our CBS can easily be adapted for handling up to eight vacuum shrouded tools.

FEATURES AND BENEFITS:

PORTABLE VACUUM RECOVERY
•Wide range of system options allows you to customize a unit to meet your needs
•Available with or without H.E.P.A. filters
•Dual vacuum pumps available for maximum vacuum flow
•Optional 4 or 8 port vacuum manifolds can be used to run vacuum shrouded power tools

BENEFITS OF VACUUM BLASTING
•Same results as open blasting without the mess
•Healthy, safe, dust-free environment
•Contains hazardous & non-hazardous materials without the need for an elaborate containment system
•Allows other work to be done in the same area while blasting in performed

CBS Workhead 314.0015	Vacuum Pump Complete	CBS System 8 Port Multi Tool Vacuum

Model	Part No.	Weight	Air Requirements	CFM/Static Lift Output Flow	Filtration	Vacuum
CBS Kit "A" **	314.000A	220lbs	200cfm@100psi	360cfm@13"Hg	Cartridge	Single Pump
CBS Kit "B" **	314.000B	280lbs	400cfm@100psi	720cfm@13"Hg	Cartridge	Dual Pump
CBS Kit "C" **	314.000C	420lbs	200cfm@100psi	360cfm@13"Hg	Cartridge/H.E.P.A.	Single Pump
CBS Kit "D" **	314.000D	480lbs	400cfm@100psi	720cfm@13"Hg	Cartridge/H.E.P.A.	Dual Pump

**4Port & 8Port manifolds for CBS systems are sold separately NOTE: 55gal steel drums are NOT supplied with vacuums

 

Contained Blast System Accessories
	314.A004		314.A006
	#4 Blast Nozzle: Tungsten carbide nozzles offer long life and economy when rough handling cannot be avoided, and where medium cutting abrasives (glass bead, steel shot & grit, mineral or coal slag) are used.		#6 Blast Nozzle: Tungsten carbide nozzles offer long life and economy when rough handling cannot be avoided, and where medium cutting abrasives (glass bead, steel shot & grit, mineral or coal slag) are used.
	314.A028		314.A029
	Inside Corner Brush: This brush is used with Novatek's CBS workhead when vacuum blasting is required on inside corners to insure proper media containment.		Outside Corner Brush: This brush is used with Novatek's CBS workhead when vacuum blasting is required on outside corners to insure proper media containment.
	314.A030		314.B300
	Flat Brush: This brush is used with Novatek's CBS workhead when vacuum blasting is required on all flat surfaces to insure proper media containment.		Female Coupling: These 3" couplings are used on all Novatek vacuum blasting equipment. They are made from durable aluminum.
	314.B305		4 Port: 314.D340 / 8 Port: 314.D345
	Male Coupling: These 3" couplings are used on all Novatek vacuum blasting recovery/filter lids, H.E.P.A. box and vacuum pumps. They are made from durable aluminum.		4 & 8 Port Vacuum Manifolds: The 4 & 8 port manifolds can be used in connection with all CBS kits to allow dust/debris recovery up to eight Novatek vacuum shrouded tools.